RETAINING POSITION AS
Rig Electrician
UTILIZE MY EDUCATION & ENHANCE
MY EXPERIENCE
Academic Qualification:
 DAE (Electrical).
 Secondary School Certificate.( Metric )
 English spoken course. (University collage of advance technologies )
 Professional PC skills.
HSE TRAINING PROGRAMMES:
ï± H2S
ï± BASIC FIRE FIGHTING
ï± BASIC ELECTRICITY
ï± COSHH
ï± MANUAL HANDLLING
ï± HAND INJERY
ï± WORK PERMIT
ï± HYGIENE & HOUSEKEEPING
ï± HELICOPTER SAFETY PROGRAMME
WORK EXPERIENCE:
 Working with Burgan drilling company Kuwait as a senior rig electrician from 20th November 2008 to till now.
 Worked with Saudi Arabian Saipem Ltd. As a Chief Electrician from 1st December2006 to 15 November 2008 in Saudi Arabia.
 Worked with Saudi Arabian Saipem Ltd. As a Rig Electrician from 14th December 2005 to 30th November 2006 in Saudi Arabia.
 Worked with Great wall Drilling COMPANY as a Rig electrician from March 2005 to December 2005.
 Worked with Oil & Gas Exploration Company Cracow as a Rig electrician from November 2003 to October 2004.
 Worked with KCA Deutag as an Asst. Electrician from November 2002 to September 2003.
EXPERIENCE:
1. Rig site experience around six years.
2. Ross Hill controls corporation SCR Drive System 1400.
3. Bentec SCR System With Programmable Logic control.
4. SG -Smart SWACO & MD totco Mud watch system.
5. Draw works UE-1320 and UE-110 National, WIRTH GH 2000 EG-2G-DC-LV.
6. Elmagco Brake 7838 & 6032. (BAYLOR BRAKE SYSTEM, BCS)
7. Mud Pumps 12-P-160 (National).
8. IDECO 1600 & WIRTH international 7500 psi. (PLC Control).
9. Varco TDS 9S & 11S with 36 & 70 Series Drive house (Siemens).
10. Canrig Top Drive Drilling System (1250 AC-681). With IDM (OMERON) Drive.
11. Rig Engine D399 & D398, Cat 3512, Cat 3512 B (PLC), cat 3412, 3406,
3404 and Cummins Engine.
12. Paging system GAI-TRONICS CORPORATION.
13. Also both type of DC Traction Motors Series and Shunt type.
RESPONSIBILITIES;
1. Supervising the electrical operations and running of the rig a daily basis.
2. Liaising with other technical department of the rig e.g. the mechanic and tool pusher as per the rig operations.
3. Maintenance of all the electrical system on the location.
4. Working and supervising the electrical equipment in terms of preventive maintenance and fast fixing of breakdown equipment both on the rig and the rig camp side.
5. Coordinating and training immediate subordinate by carrying them along in terms of the job planning as a team.
6. Daily presentation of technical reports as per the rig operations in relation to the electrical installation and the electrical equipments and safety/tool box meetings.
OBJECTIVE
RETAINING POSITION AS
Rig Electrician
UTILIZE MY EDUCATION & ENHANCE
MY EXPERIENCE
Academic Qualification:
 DAE (Electrical).
 Secondary School Certificate.( Metric )
 English spoken course. (University collage of advance technologies )
 Professional PC skills.
HSE TRAINING PROGRAMMES:
ï± H2S
ï± BASIC FIRE FIGHTING
ï± BASIC ELECTRICITY
ï± COSHH
ï± MANUAL HANDLLING
ï± HAND INJERY
ï± WORK PERMIT
ï± HYGIENE & HOUSEKEEPING
ï± HELICOPTER SAFETY PROGRAMME
WORK EXPERIENCE:
 Working with Burgan drilling company Kuwait as a senior rig electrician from 20th November 2008 to till now.
 Worked with Saudi Arabian Saipem Ltd. As a Chief Electrician from 1st December2006 to 15 November 2008 in Saudi Arabia.
 Worked with Saudi Arabian Saipem Ltd. As a Rig Electrician from 14th December 2005 to 30th November 2006 in Saudi Arabia.
 Worked with Great wall Drilling COMPANY as a Rig electrician from March 2005 to December 2005.
 Worked with Oil & Gas Exploration Company Cracow as a Rig electrician from November 2003 to October 2004.
 Worked with KCA Deutag as an Asst. Electrician from November 2002 to September 2003.
EXPERIENCE:
1. Rig site experience around six years.
2. Ross Hill controls corporation SCR Drive System 1400.
3. Bentec SCR System With Programmable Logic control.
4. SG -Smart SWACO & MD totco Mud watch system.
5. Draw works UE-1320 and UE-110 National, WIRTH GH 2000 EG-2G-DC-LV.
6. Elmagco Brake 7838 & 6032. (BAYLOR BRAKE SYSTEM, BCS)
7. Mud Pumps 12-P-160 (National).
8. IDECO 1600 & WIRTH international 7500 psi. (PLC Control).
9. Varco TDS 9S & 11S with 36 & 70 Series Drive house (Siemens).
10. Canrig Top Drive Drilling System (1250 AC-681). With IDM (OMERON) Drive.
11. Rig Engine D399 & D398, Cat 3512, Cat 3512 B (PLC), cat 3412, 3406,
3404 and Cummins Engine.
12. Paging system GAI-TRONICS CORPORATION.
13. Also both type of DC Traction Motors Series and Shunt type.
RESPONSIBILITIES;
1. Supervising the electrical operations and running of the rig a daily basis.
2. Liaising with other technical department of the rig e.g. the mechanic and tool pusher as per the rig operations.
3. Maintenance of all the electrical system on the location.
4. Working and supervising the electrical equipment in terms of preventive maintenance and fast fixing of breakdown equipment both on the rig and the rig camp side.
5. Coordinating and training immediate subordinate by carrying them along in terms of the job planning as a team.
6. Daily presentation of technical reports as per the rig operations in relation to the electrical installation and the electrical equipments and safety/tool box meetings.
NukeJobs is a nuclear jobs board that provides nuclear job seekers access to international directories of Nuclear Employers, Nuclear Resumes and Nuclear Jobs such as Nuclear Engineer Jobs, Nuclear Construction Jobs, Nuclear Power Plant Jobs, Nuclear Medicine Jobs, Nuclear Pharmacy Jobs, Nuclear Security Jobs, Nuclear Physics Jobs, Nuclear Reactor Jobs, Nuclear Material Jobs, Nuclear Safety Jobs, and Nuclear Waste Jobs.