Enclosed you will find my resume, I am interested in seeking the position for an electrician. My work experience and helping a good friend with his company for 6 years has provided me an opportunity to master many of the skills your institution requires. I am very knowledgeable in the industry, detailed oriented, have excellent customer service and organizational skills for the residential and commercial industry.
I do hold a Residential Wireman;s license in the state of Colorad,and taking Journeyman’s test in 2 weeks,traveling or even relocating is NOT A PROBLEM.
I would welcome the opportunity to discuss my qualifications and skills with you. You may contact me at (480) 433-8507 (Personal Cell). I am available for employment immediately. I look forward to hearing from you.
References upon request.
You can also contact me at my e-mail address: shinezaps4u[at]yahoo.com (personal).
Sincerely,
Bob Shine
ROBERT A. SHINE
5015 E CHEYENNE DR #32
PHOENIX,AZ 85044
E-mail: shinezaps4u[at]yahoo.com
CELL-480-433-8507
__________________________________________________
Summary I am a responsive and resourceful individual with natural ability to identify needs, achieve objectives and accomplish goals. With my skills, knowledge and attitude I can be a role model to my co-workers. I have over 20 years of experience as an electrician/apprentice.
PROFESSIONAL EXPERIENCE
8/2002 to SAND RIDGE ELECTRIC
MESA,AZ
6/2008
• Planned layout installed and repaired wiring, electrical fixtures, apparatuses and control equipment.
• Assisted subordinates and supervisors in identifying and resolving problems.
• Planned new and modified installation to minimize waste of materials, provide access for future maintenance and avoid unsightly, hazardous and unreliable wiring consistent with specifications and local electrical codes.
• Prepared sketches showing location of wiring and equipment and followed diagrams and blueprints, ensuring that concealed wiring was installed before completion of future walls, ceilings and flooring.
• Identified problem, diagnosed cause and determined corrective actions.
• Measured, cut, bent, threaded, assembled and installed electrical conduit, using tools such as hacksaw, and conduit bender.
• Pulled wiring through conduit, assisted by electrician assistant, to install and repair electrical wiring, fixtures and equipment.
• Gathered tools and supplies to be used at work site.
• Measured, cut and bent wire and conduit, using ruler and hand tools.
• Drilled holes for wiring with power drill and pulled or pushed wiring through opening.
• Traced out short circuits in wiring, using knowledge of wiring and test meter.
• Assisted in lifting, positioning and fastening objects, such as wiring, conduit and motors.
• Performed minor repairs, such as replacing fuses, light sockets, bulbs and switches.
• Maintained tools and equipment and kept supplies and parts in order.
• Disassembled defective electrical equipment replaced defective and worn parts and re-assembled equipment.
• Expedited communication between upper level management and general personnel.
• Spliced wires by stripping insulation from terminal leads, using knife and pliers, twisting and soldering wires together and applying tape and terminal caps.
• Connected wiring to lighting fixtures and power equipment.
• Installed control and distribution apparatus, such as switches, relays and circuit-breaker panels, fastening them in place with screws and bolts.
• Connected power cables to equipment, such as electric ranges and motors, and installed grounding leads.
• Tested continuity of circuits to ensure electrical compatibility and safety of components, using testing instruments, such as ohmmeters, batteries and buzzers and oscilloscope.
• Observed functioning of installed equipment and systems to detect hazards and need for adjustments, relocation, and replacement.
ROBERT A SHINE
10080 W LAMBUTH AVE
DENVER,COLO 80235
CELL-480-433-8507
FOSTER ELECTRC/COLORADO SPRINGS,CO.
7/2008 to Service Electrician
1/2009
• Planned layout installed and repaired wiring, electrical fixtures, apparatuses and control equipment.
• Assisted subordinates and supervisors in identifying and resolving problems.
• Planned new and modified installations to minimize waste of materials provide access for future maintenance and avoid unsightly, hazardous and unreliable wiring, consistent with specifications and local electrical codes.
• Prepared sketches showing location of wiring and equipment, and followed diagrams and blueprints, ensuring that concealed wiring was installed before completion of future walls, ceilings and flooring.
• Identified problems, diagnosed causes and determined corrective actions.
• Measured, cut, bent, threaded, assembled and installed electrical conduit, using tools such as hacksaw and conduit bender.
• Pulled wiring through conduit, assisted by electrician assistant, to install and repair electrical wiring, fixtures and equipment.
• Gathered tools and supplies to be used at work site.
• Measured, cut and bent wire and conduit, using ruler and hand tools.
• Drilled holes for wiring with power drill and pulled or pushed wiring through opening.
• Traced out short circuits in wiring, using knowledge of wiring and test meter.
• Assisted in lifting, positioning and fastening objects, such as wiring, conduit and motors.
• Performed minor repairs, such as replacing fuses, light sockets, bulbs and switches.
• Maintained tools and equipment and kept supplies and parts in order.
• Disassembled defective electrical equipment replaced defective and worn parts and re-assembled equipment.
• Expedited communication between upper level management and general personnel.
• Spliced wires by stripping insulation from terminal leads, using knife and pliers, twisting and soldering wires together and applying tape and terminal caps.
• Connected wiring to lighting fixtures and power equipment.
• Installed control and distribution apparatuses, such as switches, relays and circuit-breaker panels, fastening them in place with screws and bolts.
• Connected power cables to equipment, such as electric ranges and motors, and installed grounding leads.
• Tested continuity of circuits to ensure electrical compatibility and safety of components, using testing instruments, such as ohmmeters, batteries and buzzers and oscilloscope.
• Observed functioning of installed equipment and systems to detect hazards and need for adjustments, relocation, and replacement.
EDUCATIONAL BACKGROUND
GED 1979
NukeJobs is a nuclear jobs board that provides nuclear job seekers access to international directories of Nuclear Employers, Nuclear Resumes and Nuclear Jobs such as Nuclear Engineer Jobs, Nuclear Construction Jobs, Nuclear Power Plant Jobs, Nuclear Medicine Jobs, Nuclear Pharmacy Jobs, Nuclear Security Jobs, Nuclear Physics Jobs, Nuclear Reactor Jobs, Nuclear Material Jobs, Nuclear Safety Jobs, and Nuclear Waste Jobs.