Hukari Technical Services, Inc.
4251 Kipling Street • Suite 580
Wheat Ridge, CO 80033
Dear Sir/Madam,
I am very much interested in applying for the Electrical Engineer position you have advertised.
I believe my experience, skills and education would be an ideal match for this position.
I have the following experience as detailed in the attached resume.
-Strong technical experience base in Nuclear Power Plant design and licensing to a nuclear QA Program
-Registered Professional Engineer experienced in Electrical and I&C design and analysis of systems.
-Ability to interface with all disciplines and customers such as Mechanical, Civil/Structural, Licensing, PRA, Analysis, Scheduling/Planning/Cost, A/Es, Suppliers, Utilities and NRC for I&C design
-Excellent written and verbal communications skills including presentations to management, customers, and NRC.
Please submit my resume for this position. I would look forward to hearing from you soon. Thank you.
Sincerely,
Subhas Basu, PE
Sr. Electrical Engineer
3901 N Central Drive (# C105),
Hobbs, NM 88240.
T 575-942-2110
M 646-209-0284 (Cell)
subhas.basu[at]gmail.com
Subhas Basu, MSEE, PE
16013 S Desert Foothills Pkwy (#1157), Phoenix, AZ 85048 • 646-209-0284 • subhasb[at]yahoo.com
CAREER OBJECTIVE
As a dedicated nuclear professional, I am actively seeking a position that would make the best use of my background and the experience in the areas of Electrical and I&C Engineering.
SUMMARY OF QUALIFICATIONS:
-Over 20 years of experience in the areas of Electrical and I&C Engineering including:
-Origination of nuclear plant conceptual and detailed electrical design changes.
-Origination/revision of calculations (primarily power and instrument loop uncertainty)
-Documentation Review including other discipline drawings and vendor prints
-Engineering Design Modification implementation, including changes to documentation.
-Experience with nuclear plant power, instrumentation and control, including digital control/monitoring
-Good written and verbal communications and coordination skills
-Proficiency in the use of computer based office equipment and programs (including MS Office suit)
-Demonstrated team player with effective interpersonal skills
-Self starter requiring minimum oversight and directions
-Registered professional engineer
-PC proficiency in DAPPER, CAPTOR, MS Office, MS Project, Visio, DOORS and ETAP.
-Proficiency in the use of IEEE/IEC/ISA/EPRI/INPO standards and criteria for nuclear projects.
EDUCATION:
Master of Science in Electrical Engineering from Polytechnic University of New York
PROFESSIONAL AFFILIATIONS:
Licensed Professional Engineer (P.E.) - State of New York (License # 054876).
Licensed Professional Engineer (P.E.) - State of Arizona (License # 29225).
PROFESSIONAL EXPERIENCE:
Sr. Electrical / I&C Engineer [2009- Present]
National Engineering Services Corporation at the National Enrichment Facility, NM
As a Senior Electrical / I&C Engineer my responsibilities are to:
- Initiate plant modifications via LES Engineering Change Request (ECR) process
- Provide disposition to ECR’s initiated by Field Engineering Group
- Verify that the voltage drop for power cables does not exceed 3%, based on NEC requirement
- Verify load currents for switchgears and distribution panels
- Select, size and route power and control cables for ECR’s initiated by LES Design Engineering
- Prepare and/or review power and control cable schedules
- Prepare and/or review Electrical Equipment specifications
- Prepare and/or review Electrical Equipment Layouts
- Prepare and/or review LES Design documents
- Review and comment on documents prepared by non- LES Design Groups
- Communicate with other organizations to resolve technical issues
Senior Electrical / I&C Systems Engineer [2006- 2008]
Granite Services, International (A wholly owned Subsidiary of General Electric Co) at GE
-Performed Design Basis Review of Electrical Power Distribution systems to resolve NRC’s questions.
-Developed Instrumentation and Control portions of Design Control Documents for NRC.
-Developed the EMC Qualification Test Criteria for equipment, components and systems.
-Developed Equipment Qualification specifications for equipment, components and systems.
-Developed the ESBWR Condition Monitoring (an aid to Qualified Life extension) specification
-Supported the Electrical Engineering modification team with the origination/ implementation of the electrical engineering portion of modifications including plant power, I&C, and digital systems and associated engineering documentation for the existing fleet of nuclear power plants, including:
-Engineering Design Package (EDP) and Engineering Design Notice (EDN) development
-Modification test plans and test procedures development
-Design basis documents revisions
-Equipment database updates
-Design and procurement specifications/technical requirements development
Sr. Engineer, Electrical Controls & Hardware at Cymer, Inc. [2005- 2006]
-Prepared/reviewed Engineering Design Modification Packages.
-Developed complete schematic drawings for the XLX series Excimer Laser, including all subsystems
-Reviewed all cable diagrams and associated “point-to-point†wiring information.
-Ensured that all electrical wiring met the intent of the NFPA 79 and “SEMI†standard S2-0200.
Technical Manager at Exponent Engineering [2003 – 2005]
-Communicated with clients and vendors on a regular basis.
-Developed the estimates, studies and project and procurement specifications.
-Established Business Fundamentals to measure team performance.
-Prepared/reviewed Engineering Design Change Packages.
-Delegated daily, weekly and monthly tasks along with clear-cut goal statements.
-Set priorities to complete projects on time and under budget.
Senior Electrical Engineer [2002 – 2003]
EPC Global Inc. (A Division of Bechtel Engineering Corporation) at Browns Ferry Nuclear Plant
-Supported the Electrical Engineering modification team with the origination / implementation of the electrical engineering portion of modifications including plant power and I&C systems and associated engineering documentation for the Browns Ferry nuclear power plants, including:
-Engineering Design Package development
-Design basis documents revisions
-Origination/revision of calculations (power and instrumentation)
-Documentation Review including non-electrical drawings and vendor prints
-Engineering Design Modification implementation, including changes to documentation.
Senior Electrical Engineer at SpeedFam-IPEC Inc. [1996 – 2002]
As a Senior Electrical Engineer, my main role was to design, develop and test various computer-controlled equipment used for the Silicon wafer manufacturing.
Additional responsibilities and involvements were to:
-Develop and integrate system level electrical protection / controls, interlocks and Power Distribution.
-Develop/integrate system level testing, including interlock systems, and power circuits.
-Perform analysis and test on circuits, components or functional systems of products.
-Develop and maintain Electrical Specifications meeting applicable NFPA 79, UL, and CSA standards.
-Prepare /review Engineering Design Change / Modification Packages, including:
-Engineering Design Package development
-Engineering Design Modification implementation, including revision to documentation.
-Modification test plans and test procedures development
Lead Electrical Engineer at Intel Corporation [1994 – 1996]
As the Lead Electrical Engineer I was responsible for Intel Fab12 Equipment Program my responsibilities and involvements were as follows:
-F12 P854 Electrical Design criteria and site Electrical Design Standards development;
-Engineering Design Packages (EDP) review.
-Development of F12 P854 Electrical Specifications meeting NFPA 79.
-Development of F12 P854 Panel and electrical control system component schedules.
Senior Electrical Engineer [1991 – 1994]
Stone and Webster Engineering Corporation at TVA’s Sequoyah Nuclear (PWR) Plant
As part of the Electrical Engineering modification team originated I&C systems modification and associated engineering documentation for the Sequoyah nuclear power plants, including:
-Engineering Design Package development
-Design basis documents revision
-Origination/revision of instrument loop uncertainty calculations to meet NRC requirements
-Origination/revision of control set point calculations & Scaling documents
-Documentation Review including other discipline drawings and vendor prints
-Engineering Design Modification implementation, including revision to documentation.
Senior Electrical/Controls Engineer at Bechtel National, Inc. [1991 – 1991]
-Developed electrical control systems for the vitrification process at Defense Waste Reduction Facility.
-Designed and developed control logic diagrams
-Prepared/reviewed Design Change Packages as needed, including:
-Verifying existing electrical power distribution systems via drawing review and walkdowns
-Specifying new electrical power distribution system components
-Design and procurement specifications/technical requirements development
Lead Electrical Engineer [1989 – 1991]
United Engineers Constructors, Inc. at TVA’s Sequoyah Nuclear (PWR) Plant in Hixson, TN
- As part of the Electrical Engineering modification team originated electrical systems modification and associated engineering documentation for the Sequoyah nuclear power plants, including:
-Engineering Design Package development
-Design basis documents revision
-Origination/revision of Load flow, Short circuit, Voltage drop and Ampacity calculations
-Origination/revision of control set point calculations & Scaling documents
-Documentation Review including other discipline drawings and vendor prints
-Engineering Design Modification implementation, including revision to documentation.
-Development of procurement specifications and material requisition documentation
As a Senior Electrical/Controls Engineer at Savannah River Site (SRS):
-Developed System Descriptions for critical systems at SRS.
-Determined the adequacy of critical electrical equipment at SRS.
-Developed justification establishing the adequacy of critical Electrical and I&C equipment at SRS.
Senior Engineer [1985 – 1989]
Gilbert Associates, Inc. at TVA’s Sequoyah Nuclear (PWR) Plant and Cleveland Electric’s Perry Nuclear Power (BWR) plant
-Reviewed Equipment Qualification (EQ) data for all environmentally qualified electrical / I&C equipment in harsh environment.
-As part of the modifications organizations, originated electrical systems modification and associated engineering documentation for the Sequoyah and Perry nuclear power plants, including:
-Engineering Modification consisting of conceptual and detailed electrical design changes.
-Design basis documents revision
-Origination/revision of calculations (primarily power and instrument loop uncertainty)
-Origination/revision of control set point calculations & Scaling documents
-Documentation Review including other discipline drawings and vendor prints
-Engineering Design Modification implementation, including revision to documentation.
-Design and procurement specifications/ technical requirements development
Senior Electrical Engineer [1981 – 1985]
A.G. & Associates, Inc. at Fermi 2 Nuclear Power (BWR) plant in Michigan
-Engineered and designed conceptual and detailed electrical design changes.
-Engineered and designed HVAC systems.
-Reviewed plant documentation including other discipline drawings and vendor prints.
-Prepared/ reviewed engineering Design Modification packages including revision to documentation.
-Established functional requirements for all class 1E electrical /I&C equipment in harsh environment.
-Reviewed Equipment Qualification (EQ) data for all environmentally qualified electrical / I&C equipment in harsh environment.
-Interfaced with electrical /I&C equipment vendors.
Senior Electrical / Controls Engineer [1979 – 1981]
CAM Consulting Engineers: New York, NY
As the Senior Electrical/Controls Engineer in charge of the design, development and integration of the Distributed Control System protection, alarm, indication and power distribution for the 500-MGD wastewater treatment plant in Newark, NJ, I was involved in the engineering design, vendor interface and testing of all electrical equipment and the Distributed Control System components for this important EPA municipal wastewater facility project.
Electrical Engineer [1978 – 1979]
Burns & Roe, Inc.: Oradell, NJ
Designed Engineered Safety Features Actuation System (ESFAS) for a PWR power plant.
Electrical Controls Engineer [1977 – 1978]
EBASCO Services, Inc.: New York, NY
Developed Plant Systems descriptions for the Waterford nuclear power (PWR) plant.
Electrical Engineer [1973 – 1977]
Public Service Electric & Gas (PSE& G) Company: Newark, NJ
-Designed 480 V / 4160 V Power Distribution Systems including substation design.
-Developed Protective relaying scheme to protect electrical transformers and distribution systems.
PERSONAL DATA:
As a naturalized US citizen, Mr. Subhas Basu is capable of obtaining and maintaining unescorted access badge and clearance at any nuclear power plant.
NukeJobs is a nuclear jobs board that provides nuclear job seekers access to international directories of Nuclear Employers, Nuclear Resumes and Nuclear Jobs such as Nuclear Engineer Jobs, Nuclear Construction Jobs, Nuclear Power Plant Jobs, Nuclear Medicine Jobs, Nuclear Pharmacy Jobs, Nuclear Security Jobs, Nuclear Physics Jobs, Nuclear Reactor Jobs, Nuclear Material Jobs, Nuclear Safety Jobs, and Nuclear Waste Jobs.