I am a very hard working person that was plenty hands on experience in the construction industry. I am self motivated and self educated in AutoCAD and have accomplished a lot of knowledge over the last 20+ years of using the software. I feel that I am a good candidate for this position because I have not only the ability to construct buildings but I also have the expertise to produce construction documents with both AutoCAD Architecture and Revit Architecture deriving 2D plans from full 3D B.I.M. (Building Information Modeling)
Michael J. Moore
(228) 383-0742 Cell
mjmoore3250[at]yahoo.com
Objective
I am a very hard working person that was plenty hands on experience in the construction industry. I am self motivated and self educated in AutoCAD and have accomplished a lot of knowledge over the last 20+ years of using the software. I feel that I am a good candidate for this position because I have not only the ability to construct buildings but I also have the expertise to produce construction documents with both AutoCAD Architecture and Revit Architecture deriving 2D plans from full 3D B.I.M. (Building Information Modeling)
Education
Freeport Senior High School 12615 Business Highway 331, Freeport, FL 32439
Work History
2010 - Present | Electrician | Howell Electrical Services
2279 Henry Cochran Rd Lucedale MS 39452 (601) 508-3854
As lead electrician my duties consist of all aspects of commercial new building electrical construction. I supervise 9 in field electricians and helpers.
2005 - 2009 | Owner / Designer |3D CAD Studios, LLC.
304 S. 2nd St. Bay St. Louis MS. 39520 (228) 383-0742
As owner, I work with large construction companies and Architectural Firms to construct Building Information Models (B.I.M.) of various large projects. I constructed the B.I.M. Models from Construction Documents using the latest AutoCAD Architecture or Revit Architecture software. I would then utilize the models to assist producing contract documents and/or in finding Architectural, Structural and MEP design incongruence’s to help generate R.F.I.’s. I worked as a contract draftsman for many architects and have contracted many architectural renderings. (Reason’s for leaving - I found it very difficult to maintain a living as a freelance CAD Draftsman especially in today’s economy)
2003- 2005 | Project Manager |Williams and Assoc. Arch.
250 Beauvoir Rd. Biloxi, MS. 39531 (228) 388-1025
As lead project manager, I assisted in marketing, Production Drafting and Construction Administration as well as, acted as liaison with the client, engineers, specialty consultants, contractors and architects. My prime responsibilities were directing the project from inception to completion in accordance to pre-determined plans and schedules within the authorized project budget. As project manager, I was responsible for the production of Schematic Design, Design Development and Construction Documents. (Reason for leaving - My family and I was displaced from Hurricane Katrina, I commuted to work to help finish existing projects, I was a contract employee from 2003 to 2005)
1999 - 2003 |Design Build |G.F. Gilmore Contractors, Inc.
644 Oliver Road Montgomery, AL 36117 (334) 244-1700
As a design build draftsman my duties where the design Butler metal buildings to suit clients’ needs. I have designed many office and warehouse buildings. In addition to design build drafting I was responsible for providing estimates. (Reason for leaving - The sole proprietor was in bad health and has retired)
1995 - 1999 | Lead Electrician |Panhandle Electric
80 Camelia Dr Pensacola, FL 32505 (850) 433-1912
As lead electrician for Panhandle Electric Sales and Service, I worked on many commercial projects including new elementary schools, hospitals, 19 story condos, new and renovations to industrial buildings. I also preformed many residential, commercial and industrial electrical service calls. I also supervised up to 15+/- employees.
1990 - 1995 | Plant Manager |ECO Built Inc.
1471 S. Tallassee St. Dadeville, AL. 36853 (256) 825-3001
As plant manager my duties where to produce accurate structural shop drawings and erection of Structural Cold Roll Metal Framing Systems for multi story hotels. In addition, I supervised 40+ employees while manufacturing CRC framed wall systems. While working in the field of residential, commercial and industrial construction as superintendant , I preformed duties such as block and brick masonry, concrete form pour and finisher, rod buster, conventional wood framing, cold roll metal framing, all aspects of roofing (Licensed Unlimited Roofing Contractor), plumbing, HVAC, and heavy equipment operator. I have also assisted in much design built projects throughout the U.S. (reason for leaving - Business Closed)
Experience
Software Experience
AutoCAD - 20yrs 2D drafting. 20yrs 3D Solid Modeling
Autodesk Architecture - 12yrs Building Information Modeling, Fluent with all aspects of AutoCAD Including creating complex STYLES
Revit Architecture - 5yrs BIM (Building Information Modeling), Fluent with all aspects of REVIT including creating complex FAMILIES
Revit Structural and MEP / AutoCAD Structural, MEP and Land Desktop
3D Studio Max - 6yrs Complex 3D modeling and renderings
Microsoft Office, Visio, Microsoft Projects, ECT...
Adobe Suites, Photoshop, Acrobat pro, ECT...
Construction Experience
While assisting in the design and/or construction of many residential homes as well as commercial built project, Michael Moore has hands on experience as:
Masonry: Brick and block mason • Form pour and finish concrete slabs • Post tension and pre-stress slabs
•Hollow core planks • Rod Busting • Snap Tie and C-Clamp wall systems • ICF (Insulated Concrete Forms)
Carpentry: Conventional wood framing • Cold Roll Steel framing • Wood and metal truss design, build and set Conventional stick built roof systems • Trim carpentry
Electrical: Journeyman Electrician • Residential, commercial and industrial experience • Experienced working with 110/208v 277/488v 347/600v • Distribution Panels, Switch Gears, Dry- Type Trans. • Rectifiers, Relays, Low Volt Control Wiring. • Programmable Simplex Fire Alarm Systems • Reading and drafting Electrical Plans and Schematics
Roofing: Okaloosa / Walton County Reg. Unlimited Roofing Contractor • Asphalt shingles, Wood Shakes • Metal roof systems • EMPD, PVC, Pliable Built-up systems • Life/Monair Tile, Pan and Lid tile, Slate Miscellaneous duties: Drywall hang tap and finish • Interior caulk and painting• Plumbing • Locksmith, conventional lock picking and re keying, electronic lock sets
Michael has assisted in design and/or building many residencies in world renowned townships such as Seaside, FL., Water Colors, FL. Rosemary Beach, FL. and Sandestin, FL. Michael has also work on Bridge construction, High Rise buildings, Banks, Hospitals, Churches, Schools and many other various commercial construction projects.
Architectural and Structural Drafting Projects
Michael J. Moore has served as Project Manager, Production Manager, Senior Draftsman, Construction Administrator and in various capacities within teams on the following projects. The scope of Architectural Services has included Schematic Design, Development, Construction Documents, Construction Administration, consulting, Electrical Design, and Marketing Illustrations and renderings. The Design Drafting includes professional 2D Construction Documents derived from a full 3D Model via Autodesk (AutoCAD) Architecture 2009 or REVIT Architecture 2009 B.I.M. (Building Information Modeling.)
Industrial
Shin Young SMART Plant, Laverne, AL
Municipalities
Southern Law and Poverty Museum, Montgomery, AL
Smith Station Water Authority, Smith Station, AL
Aliceville Federal Prison, Bureau of Prisons Washington D.C, Aliceville, AL
Concessions Facility for the City of Wetumpka Sportsplex, Wetumpka, AL
Casino’s Resorts and Hotels
Treasure Bay Casino and Resort, Biloxi, MS
Wind Creek Casino and Resort, Atmore, AL
Porch Creek Indians Casino and Resort, Wetumpka, AL
Lake Guntersville Hotel, Lake Guntersville, AL
Spring Hill Suites, Austin TX
Residency Inn, Warrenville, IL
The Gables Bed and Breakfast, Tallassee, AL
Gibson’s View Plantation, Tallassee, AL
Infirmaries
St. Luke’s Medical Center, Montgomery, AL
Wetumpka Medical Center, Wetumpka, AL
Education
JB Young Technical Building, Ellisville, MS
Gym Renovations to Hayneville Middle School, Hayneville, AL
New Dining Hall for St. Stanislaus, Bay Saint Louis, MS
Spanish Street, Mixed Use Residence Development SIAS University Housing, China
Renovations to Grider Hall, Talladega, AL
Brighton Middle School, Birmingham, AL
New Student Center for Helen Keller Deaf and Blind School, Talladega, AL
Coosa Elementary School, Sylacauga, AL
USA Bell Tower, University of Southern Alabama, Mobile, AL
Wood Hall, Montgomery, AL
Residencies and multi-family dwellings
Olympia Gardens Apartments, Montgomery, AL
Barrington Place Apartments, Montgomery, AL
Carson’s Landing Apartments, Montgomery, AL
Chateau Charmant Condo, Long Beach, MS
Commercial
1st Community Bank of Eclectic, Eclectic, AL
New Convenience Store, Autaugaville, AL
Institutional
Poplar Springs Baptist Church, Poplar Springs, GA
Spirit of the Sward, Greenville, AL
Steeple Renovations to Thomasville Baptist Church, Thomasville, AL
Shilo Baptist Church, Montgomery AL
Tallassee Assembly of God, Tallassee, AL
NukeJobs is a nuclear jobs board that provides nuclear job seekers access to international directories of Nuclear Employers, Nuclear Resumes and Nuclear Jobs such as Nuclear Engineer Jobs, Nuclear Construction Jobs, Nuclear Power Plant Jobs, Nuclear Medicine Jobs, Nuclear Pharmacy Jobs, Nuclear Security Jobs, Nuclear Physics Jobs, Nuclear Reactor Jobs, Nuclear Material Jobs, Nuclear Safety Jobs, and Nuclear Waste Jobs.